design a garden pond and waterfall

design a garden pond and waterfall

Backyard Ponds > Design A Garden Pond And Waterfall

How to Design a
Garden Pond and Waterfall

When thinking about how to design a garden pond and waterfall don't forget about the role pond waterfall pumps play. You can start to get up to speed on those with this brief pond waterfall pumps overview. Getting ideas from that that you may want to include even if building pondless waterfall in your backyard.

In addition to what was revealed on that page remember this. How high you pump the water only roughly corresponds to what you'll need in terms of flow capacity. Which is usually expressed in terms of "gallons per hour".

This is why you'll want to investigate pond waterfall pumps not just a pond pump. Since waterfall pumps give more "head". Or oomph to get the water where you need it.

You determine how much actual "head" you need based on the height of your water feature, how long the pipe is leading to it, that pipe's diameter, and the number of turns, elbows, etc involved in getting there.

Here's How to Have the Fish Pond or Water Garden You've Always Dreamed of!

If you insist, here's a handy head calculator you can use.

While we're at it here's a waterfall flow calculator too. That can give you an idea of GPH you'll need when you design a garden pond and waterfall feature.

Typically the specs for pond waterfall pumps display both gph and head (measured in feet). It pays to pay attention to this and watts required. Since some waterfall pumps are notoriously inefficient and require more power to run.

Design A Garden Pond And Waterfall